27. November 2019 /

Neue Publikation von Nikolaos Karadimitriuo, Holger Steeb und Vahid Joeker-Niasar

[Bild: © panthermedia.net / Karsten Ehlers]

Dr. Nikolaos Karadimitriuo (Institut für Mechanik), Prof. Dr. Holger Steeb (Mitglied des SimTech-Direktoriums und Professor am Institut für Mechanik) und die Gruppe von Dr. Vahid Joeker-Niasar von der University of Manchester haben eine gemeinsame Publikation zur zweiphasigen Strömungsdynamik basierend auf mikrofluidischen Experimenten im Kontext von SimTech und dem SFB 1313 veröffentlicht.
Den Abstract zum Artikel finden Sie hier

"The interaction between fluid-fluid and solid-fluid interfacial forces and surface roughness control the wettability. The ionic strength is the most important factor that controls electro-static forces. Thus, a modification of the ionic strength can potentially lead to a change of the wettability, as shown in recent experimental works related to low-salinity water flooding (LSWF), which is an enhanced oil recovery technology. Despite the significant research published on this topic, for the first time, we present how a change of the ionic strength alters the wettability in a pore network micromodel made of silanised PDMS. We visualised the invasion of brine in an elongated hydrophobic PDMS micromodel, initially saturated with Fluorinert. Under different injection rates and ionic strengths and using image processing, we quantified the contact angle distribution in the flow network, the recovery curve with time, the brine breakthrough time, and the temporal change of resident saturation. The results imply that there is an optimal range of salinity at which saturation change accelerates and the breakthrough saturation maximises, which highlights the concept of optimal salinity in wettability alteration. Also, we observed a shift of the contact angle distribution towards a more water-wet state. Given the non-monotonic trend of the breakthrough saturation with brine salinity, as well as recovery time versus the ionic strength, we conclude that the induced surface roughness is not the primary drive behind the accelerated saturation change. Therefore, the recovery time difference can be primarily attributed to the local alterations of the wetting properties of the porous medium due to the change of the ionic strength."

Der Artikel wurde im Water Resources Management Journal publiziert.

Zum Seitenanfang