Publications 2010

  1. A

    1. E. Arnold, “Can the Best-Alternative-Justification solve Hume`s Problem? On the Limits of a Promising Approach.,” Philosophy of Science, vol. 77, no. 4, Art. no. 4, 2010, doi: 10.1086/656010.
    2. O. Avci and W. Ehlers, “Stress-dependent Failure Surface of Granular Materials,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 697--698, 2010, doi: 10.1002/pamm.201010333.
    3. T. Aven and O. Renn, Risk Management and Governance. Concepts, Guidelines and Applications, vol. 0. Springer, 2010. [Online]. Available: http://www.springer.com/economics/r+%26+d/book/978-3-642-13925-3

  2. B

    1. M. Bader, C. Beck, J. Schwaiger, and C. Vigh, “Dynamically Adaptive Simulations with Minimal Memory Requirement-Solving the Shallow Water Equations Using Sierpinski Curves,” SIAM Journal on Scientific Computing, vol. 32, no. 1, Art. no. 1, 2010, doi: 10.1137/080728871.
    2. H. M. N. K. Balini, I. Houtzager, J. Witte, and C. W. Scherer, “Subspace identification and robust control of an AMB system,” in Proc. American Control Conf., in Proc. American Control Conf. Baltimore, MD, USA, 2010, pp. 2200–2205. [Online]. Available: https://doi.org/10.1109/ACC.2010.5531268
    3. H. M. N. K. Balini, J. Witte, and C. W. Scherer, Active magnetic bearings: Robust performance against uncertainty in rotational speed. 5th IFAC Symposium on Mechatrinic Systems, 2010. doi: 10.3182/20100913-3-US-2015.00059.
    4. H. M. N. K. Balini, J. Witte, and C. W. Scherer, “Advanced Control for Active Magnetic Bearing Systems,” in 10th Int. Conf. of the Eur. Society for Precision Engineering and Nanotechnology, in 10th Int. Conf. of the Eur. Society for Precision Engineering and Nanotechnology. Delft, 2010, pp. 344–347.
    5. H. M. N. K. Balini, J. Witte, C. W. Scherer, and S. G. Dietz, “Active magnetic bearings: Robust performance against uncertainty in rotational speed,” in 5th IFAC Symposium on Mechatrinic Systems, in 5th IFAC Symposium on Mechatrinic Systems. Cambridge, USA, 2010, pp. 355–360. [Online]. Available: https://doi.org/10.3182/20100913-3-US-2015.00059
    6. A. Benzing, B. Koldehofe, M. Völz, and K. Rothermel, “Multilevel Predictions for the Aggregation of Data in Global Sensor Networks,” Proceedings of the 14th IEEE/ACM International Symposium on Distributed Simulation and Real-Time Applications, vol. 0, pp. 169--178, 2010, doi: 10.1109/DS-RT.2010.26.
    7. V. Boschert, A. Krippner-Heidenreich, M. Branschädel, J. Tepperink, A. Aird, and P. Scheurich, “Single chain TNF derivatives with individually mutated receptor binding sites reveal differential stoichiometry of ligand receptor complex formation for TNFR1 and TNFR2,” Cellular Signalling, vol. 22, no. 7, Art. no. 7, 2010, [Online]. Available: http://www.ncbi.nlm.nih.gov/pubmed/20206684
    8. C. Braun and H.-J. Wunderlich, “Algorithmen-basierte Fehlertoleranz für Many-Core-Architekturen,” it - Information Technology, vol. 52, no. 4, Art. no. 4, 2010, doi: 10.1524/itit.2010.0593.
    9. C. Breindl, S. Waldherr, and F. Allgöwer, “A robustness measure for the stationary behavior of qualitative gene regulation networks,” Proceedings of the 11th International Symposium on Computer Applications in Biotechnology (CAB 2010), vol. 11, pp. 36--41, 2010, doi: 10.3182/20100707-3-BE-2012.0031.
    10. C. Böhm and F. Allgöwer, “Efficient offline model predictive control of constrained nonlinear tperiodic systems,” IFAC Workshop on Periodic Control Systems, pp. 12--17, 2010, doi: 10.3182/20100826-3-TR-4016.00006.
    11. C. Böhm, R. Findeisen, and F. Allgöwer, “Robust control of constrained sector bounded Lure systems with applications to nonlinear model predictive control,” Dynamics of Continuous, Discrete and Impulsive Systems - Series B, vol. 17, no. 6, Art. no. 6, 2010, [Online]. Available: http://online.watsci.org/contents2010/v17n6b.html
    12. C. Böhm, M. Lazar, and F. Allgöwer, “A relaxation of Lyapunov conditions and controller synthesis for discrete-time periodic systems,” 49th IEEE Conference on Decision and Control, pp. 3277--3282, 2010, doi: 10.1109/CDC.2010.5717076.
    13. C. Böhm, M. Lazar, and F. Allgöwer, “Stability analysis of periodically time-varying systems using periodic tLyapunov functions,” IFAC Workshop on Periodic Control Systems, pp. 57--62, 2010, doi: 10.3182/20100826-3-TR-4016.00014.
    14. M. Bürger and M. Guay, “Robust Constraint Satisfaction for Continuous-Time Nonlinear Systems in Strict Feedback Form,” IEEE Transactions on Automatic Control, vol. 55, no. 11, Art. no. 11, 2010, doi: 10.1109/TAC.2010.2061090.
    15. M. Bürger, G. Schmidt, and F. Allgöwer, “Preference Based Group Agreement in Cooperative Control,” IFAC Symposium on Nonlinear Control Systems (NOLCOS), vol. 0, pp. 149--154, 2010, doi: 10.3182/20100901-3-IT-2016.00176.

  3. C

    1. K. Carlberg, L. Brencher, B. Haasdonk, and A. Barth, “Data-driven time parallelism via forecasting,” SIAM Journal on Scientific Computing, vol. 41, no. 3, Art. no. 3, 2019, doi: 10.1137/18M1174362.
    2. J. J. Cerda, E. Elfimova, V. Ballenegger, E. Krutikova, A. Ivanov, and C. Holm, “Behavior of bulky ferrofluids in the diluted low-coupling regime: Theory and simulation,” Physical Review E, vol. 81, no. 1, Art. no. 1, 2010, doi: 10.1103/PhysRevE.81.011501.

  4. D

    1. A. Dadalau, M. Mottahedi, K. Groh, and A. Verl, “Parametric Modeling of ball screw spindles,” Production Engineering Research and Development, vol. 4, no. 6, Art. no. 6, 2010, doi: 10.1007/s11740-010-0264-z.
    2. D. DAndrea, C.-D. Munz, and R. Schneider, “Modeling of Long-Range Intra- and Inter-Species Charged Particle Collisions for PIC Simulations,” Communications in Computational Physics, vol. 7, pp. 877--903, 2010, doi: 10.4208/cicp.2009.09.094.
    3. M. Daub, S. Waldherr, F. Allgöwer, P. Scheurich, and G. Schneider, “Death wins against life in a spatially extended model of the caspase-3/8 feedback loop,” BioSystems, vol. 108, pp. 45--51, 2010, doi: 10.1016/j.biosystems.2012.01.006.
    4. S. G. Dietz and C. W. Scherer, “Robust output feedback control against disturbance filter uncertainty described by dynamic integral quadratic constraints,” Int. J. Robust Nonlin., vol. 20, no. 17, Art. no. 17, Nov. 2010, [Online]. Available: https://doi.org/10.1002/rnc.1554
    5. F. Dommert et al., “Towards multiscale modeling of ionic liquids: From electronic structure to bulk properties,” Journal of Molecular Liquids, vol. 152 (1–3), pp. 2--8, 2010, doi: 10.1016/j.molliq.2009.06.014.

  5. E

    1. R. Echter and M. Bischoff, “Numerical efficiency, locking and unlocking of NURBS finite elements,” Computer Methods in Applied Mechanics and Engineering, vol. 199 (5–8), pp. 374--382, 2010, doi: 10.1016/j.cma.2009.02.035.
    2. C. Eck, B. Jadamba, and P. Knabner, “Error estimates for a finite element dicretization of a phase field model for mixtures,” SIAM Journal of Numerical Analysis, vol. 47, no. 6, Art. no. 6, 2010, doi: 10.1137/050637984.
    3. W. Ehlers, “Homogenisation of discrete media towards micropolar continua: a computational approach,” AIP Proceedings, vol. 1227, pp. 306--313, 2010, doi: 10.1063/1.3435400.
    4. F. Ejaz, A. Guthke, T. Wöhling, and W. Nowak, “Comprehensive uncertainty analysis for surface water and groundwater projections under climate change based on a lumped geo-hydrological model,” Journal of Hydrology, vol. 626, 2023, doi: https://doi.org/10.1016/j.jhydrol.2023.130323.
    5. P. Estevez et al., “A Haptic Tele-operated System for Microassembly,” in in: Ratchev S. (eds) Precision Assembly Technologies and Systems. IPAS 2010. IFIP Advances in Information and Communication Technology, vol. 315 Springer, in in: Ratchev S. (eds) Precision Assembly Technologies and Systems. IPAS 2010. IFIP Advances in Information and Communication Technology, vol. 315 Springer, vol. 315. 2010, pp. 13–20. [Online]. Available: https://link.springer.com/chapter/10.1007/978-3-642-11598-1_2

  6. F

    1. M. Falk, M. Klann, M. Reuss, and T. Ertl, “3D Visualization of Concentrations from Stochastic Agent-based Signal Transduction Simulations,” Proceedings of IEEE International Symposium on Biomedical Imaging: From Nano to Macro (ISBI ’10), vol. 0, pp. 1301--1304, 2010, [Online]. Available: http://dx.doi.org/10.1109/ISBI.2010.5490235
    2. J. Fehr and P. Eberhard, “Error-controlled Model Reduction in Flexible Multibody Dynamics,” ASME Journal of Computational and Nonlinear Dynamics, vol. 5, no. 3, Art. no. 3, 2010, doi: 10.1115/1.4001372.
    3. F. Fleissner, A. Lehnart, and P. Eberhard, “Dynamic simulation of sloshing fluid and granular cargo in transport vehicles,” Vehicle System Dynamics, vol. 48, no. 1, Art. no. 1, 2010, doi: 10.1080/00423110903042717.
    4. A. Freuer, M. Reble, C. Böhm, and F. Allgöwer, “Efficient Model Predictive Control for Linear Periodic Systems,” Proceedings of the 19th International Symposium on Mathematical Theory of Networks and Systems, pp. 1403--1409, 2010, [Online]. Available: http://www.conferences.hu/mtns2010/proceedings/Papers/240_066.pdf

  7. G

    1. E. Gabriel, S. Feki, K. Benkert, and M. Resch, “Towards performance portability through runtime adaptation for high performance computing applications,” Concurrency and Computation: Practice and Experience, vol. 22, no. 16, Art. no. 16, 2010, doi: 10.1002/cpe.1586.
    2. M. Gerken et al., “Fluorescence correlation spectroscopy reveals topological segregation of the two tumor necrosis factor membrane receptors,” Biochimica et Biophysica Acta, vol. 1798, no. 6, Art. no. 6, 2010, doi: 10.1016/j.bbamem.2010.02.021.
    3. H. Gilbergs, K. Frenner, P. Eberhard, and W. Osten, “Modellgestützte Rekonstruktion der Lage von dezentrierten Linsen in optischen Systemen,” DGaO-Proceedings, vol. 111, 2010, [Online]. Available: http://www.dgao-proceedings.de/abstract/abstract_only.php?id=1166
    4. H. Gomaa, N. Roth, J. Schlottke, and B. Weigand, “DNS Calculations for the Modelling of Real Industrial Applications,” Atomization and Sprays, vol. 20, no. 4, Art. no. 4, 2010, doi: 10.1615/AtomizSpr.v20.i4.
    5. T. P. M. Goumans and J. Kästner, “Hydrogen Atom Tunneling Could Contribute to H2 Formation in Space,” Angew. Chem. Int. Ed., vol. 49, no. 40, Art. no. 40, 2010, doi: 10.1002/anie.201001311.
    6. K. Grass and C. Holm, “Mesoscale modelling of polyelectrolyte electrophoresis,” Faraday Discussions, vol. 144, 2010, doi: 10.1039/b902011j.
    7. C. C. Gruber and J. Pleiss, “Systematic benchmarking of large molecular dynamics simulations employing GROMACS on massive multiprocessing facilities.,” Journal of Computational Chemistry, vol. 32, no. 4, Art. no. 4, 2010, doi: 10.1002/jcc.21645.
    8. A.-Y. Guo, J. Sun, P. Jia, and Z. Zhao, “A Novel microRNA and transcription factor mediated regulatory network in schizophrenia,” BMC Systems Biology, vol. 4, no. 10, Art. no. 10, 2010, doi: 10.1186/1752-0509-4-10.
    9. M. Günther and S. Schmitt, “A macroscopic ansatz to deduce the Hill relation,” Journal of Theoretical Biology, vol. 263, no. 4, Art. no. 4, 2010, doi: 10.1016/j.jtbi.2009.12.027.

  8. H

    1. B. Haasdonk, “Effiziente und gesicherte Modellreduktion für parametrisierte dynamische Systeme,” at-Automatisierungstechnik, vol. 58, no. 8, Art. no. 8, 2010, doi: 10.1524/auto.2010.0861.
    2. B. Haasdonk and E. Pekalska, “Indefinite Kernel Discriminant Analysis,” Proceedings of COMPSTAT 2010, pp. 221--230, 2010, doi: 10.1007/978-3-7908-2604-3_20.
    3. H. Harbrecht, “Finite element based second moment analysis for elliptic problems in stochastic domains,” Numerical Mathematics and Advanced Applications. Proceedings of ENUMATH 2009, vol. 0, pp. 433--442, 2010, doi: 10.1007/978-3-642-11795-4_46.
    4. H. Harbrecht, “On Output Functionals of Boundary Value Problems on Stochastic Domains,” Mathematical Methods in the Applied Sciences, vol. 33, no. 1, Art. no. 1, 2010, doi: 10.1002/mma.1153.
    5. H. Harbrecht, “A finite element method for elliptic problems with stochastic input data,” Applied Numerical Mathematics, vol. 60, no. 3, Art. no. 3, 2010, doi: 10.1016/j.apnum.2009.12.002.
    6. J. Hasenauer, C. Breindl, S. Waldherr, and F. Allgöwer, “Approximative classification of regions in parameter spaces of nonlinear ODEs yielding different qualitative behavior,” Proceedings of the IEEE Conference on Decision and Control (CDC), Atlanta, USA, vol. 0, pp. 4114--4119, 2010, doi: 10.1109/CDC.2010.5718044.
    7. J. Hasenauer, P. Rumschinski, S. Waldherr, S. Borchers, F. Allgöwer, and R. Findeisen, “Guaranteed steady state bounds for uncertain (bio-)chemical processes using infeasibility certificates,” J. Process Control, vol. 20, no. 9, Art. no. 9, 2010, doi: 10.1016/j.jprocont.2010.06.004.
    8. J. Hasenauer, S. Waldherr, M. Doszczak, P. Scheurich, and F. Allgöwer, “Density-based modeling and identification of biochemical networks in cell populations,” Proc. of 9th Int. Symp. on Dynamics and Control of Process Syst. (DYCOPS), Leuven, Belgium, vol. 9, pp. 320--325, 2010, doi: 10.3182/20100705-3-BE-2011.00053.
    9. J. Hasenauer, S. Waldherr, N. Radde, M. Doszczak, P. Scheurich, and F. Allgöwer, “A maximum likelihood estimator for parameter distributions in heterogeneous cell populations,” Procedia Computer Science, vol. 1, no. 1, Art. no. 1, 2010, doi: 10.1016/j.procs.2010.04.185.
    10. J. Hasenauer, S. Waldherr, K. Wagner, and F. Allgöwer, “Parameter Identification, Experimental Design and Model Falsification for Biological Network Models Using Semidefinite Programming,” IET Syst. Biol., vol. 4, no. 2, Art. no. 2, 2010, doi: 10.1049/iet-syb.2009.0030.
    11. Y. Heider, B. Markert, and W. Ehlers, “Dynamic Wave Propagation in Porous Media Semi-Infinite Domains,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 499--500, 2010, doi: 10.1002/pamm.201010242.
    12. A. Held and R. Seifried, A Procedure for Shape Optimization of Controlled Elastic Multibody Systems, vol. 0. 2010. doi: 10.4203/ccp.94.100.
    13. R. Helmig, J. Niessner, and H. Class, “Recent advances in finite element methods for multi-phase flow processes in porous media,” International Journal of Computational Fluid Dynamics, vol. 20, pp. 245--252, 2010, doi: 10.1080/00036810600792154.
    14. R. Helmig, J. Niessner, B. Flemisch, M. Wolff, and J. Fritz, “E?cient Modeling of Flow and Transport in Porous Media Using Multiphysics and Multiscale Approaches,” Handbook of Geomathematics, vol. 0, pp. 417--457, 2010, doi: 10.1007/978-3-642-01546-5_15.
    15. O. A. Hickey, C. Holm, J. L. Harden, and G. W. Slater, “Implicit Method for Simulating Electrohydrodynamics of Polyelectrolytes,” Physical Review Letters, vol. 105, no. 14, Art. no. 14, 2010, doi: 10.1103/PhysRevLett.105.148301.
    16. C. Huber, H. Gomaa, and B. Weigand, “Application of a Novel Turbulence Generator to Multiphase Flows Computations,” High Performance Computing in Science and Engineering ’ 10: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2010, vol. 0, pp. 273--286, 2010, doi: 10.1007/978-3-642-15748-6_21.
    17. C. Hubig, “Leistungen und Grenzen der Virtualität beim Wissenserwerb,” Kornwachs, K.(Hrsg.): Technologisches Wissen., vol. 0, 2010, [Online]. Available: http://www.springer.com/engineering/book/978-3-642-14371-7
    18. P. Hypko, M. Tilebein, and R. Gleich, “Benefits and uncertainties of performance-based contracting in manufacturing industries: An agency theory perspective,” Journal of Service Management, vol. 21, no. 4, Art. no. 4, 2010, doi: 10.1108/09564231011066114.

  9. I

    1. T. B. Ionescu, A. Piater, W. Scheuermann, and E. Laurien, “An Aspect-Oriented Approach for the Development of Complex Simulation Software,” Journal of Object Technology, vol. 9, no. 1, Art. no. 1, 2010, [Online]. Available: http://www.jot.fm/issues/issue_2010_01/article4.pdf

  10. J

    1. E. A. Jaegle and E. J. Mittemeijer, “Predicting microstructures from phase transformation kinetics: the case of isochronal heating and cooling from a supersaturated matrix,” Modelling and Simulation in Materials Science and Engineering, vol. 18, p. 065010, 2010, doi: 10.1088/0965-0393/18/6/065010.
    2. F. Jaegle, O. Cabrit, S. Mendez, and T. Poinsot, “Implementation methods of wall functions in cell-vertex numerical solvers,” Flow, Turbulence and Combustion, vol. 85, no. 2, Art. no. 2, 2010, doi: 10.1007/s10494-010-9276-1.

  11. K

    1. A. Kaplanyan and C. Dachsbacher, “Cascaded Light Propagation Volumes for Real-Time Indirect Illumination,” Proceedings of the 2010 ACM SIGGRAPH symposium on Interactive 3D Graphics and Games, vol. 0, 2010, doi: 10.1145/1730804.1730821.
    2. D. Karastoyanova, “On Scientific Experiments and Flexible Service Compositions,” From Active Data Management to Event-Based Systems and More, vol. 6462, pp. 175--194, 2010, doi: 10.1007/978-3-642-17226-7_11.
    3. D. Karastoyanova and F. Leymann, “Making Scientific Applications on the Grid Reliable Through Flexibility Approaches Borrowed from Service Compositions,” Handbook of Research on P2P and Grid Systems for Service-Oriented Computing: Models, Methodologies and Applications, pp. 635--656, 2010, doi: 10.4018/978-1-61520-686-5.ch027.
    4. D. Kauker, H. Sanftmann, S. Frey, and T. Ertl, “Memory Saving Fourier Transform on GPUs,” Computer and Information Technology (CIT), 2010 IEEE 10th International Conference on, pp. 1152--1157, 2010, doi: 10.1109/CIT.2010.209.
    5. D. Kern, P. Marshall, and A. Schmidt, “Gazemarks: gaze-based visual placeholders to ease attention switching,” Proceedings of the 28th international conference on Human factors in computing systems, pp. 2093--2102, 2010, doi: 10.1145/1753326.1753646.
    6. F. Kissling and C. Rohde, “The computation of nonclassical shock waves with a heterogeneous multiscale method,” Networks and Heterogeneous Media, vol. 5, no. 3, Art. no. 3, 2010, doi: 10.3934/nhm.2010.5.661.
    7. A. Kohler, G. Schley, and M. Radetzki, “Fault Tolerant Network on Chip Switching with Graceful Performance Degradation,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 29, no. 6, Art. no. 6, 2010, doi: 10.1109/TCAD.2010.2048399.
    8. I. Komarova and W. Ehlers, “A Multiphasic Model Describing the CO2 Injection Problem,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 373--374, 2010, doi: 10.1002/pamm.201010179.
    9. A. Kopp, P. J. Binning, K. Johannsen, R. Helmig, and H. Class, “A contribution to risk analysis for leakage through abandoned wells in geological CO2 storage,” Advances in Water Resources, vol. 33, no. 8, Art. no. 8, 2010, doi: 10.1016/j.advwatres.2010.05.001.
    10. O. Kopp, K. Görlach, and F. Leymann, “Extending Choreography Spheres to Improve Simulations,” International Organization for Information Integration and Web-based Application and Services 2010 (iiWAS 2010), 2010, doi: 10.1145/1967486.1967598.
    11. A. Kramer, J. Hasenauer, F. Allgöwer, and N. Radde, “Computation of the posterior entropy in a Bayesian framework for parameter estimation in biological networks,” IEEE Multi Conference on Systems and Control, vol. 0, pp. 493--498, 2010, doi: 10.1109/CCA.2010.5611198.
    12. A. Kramer and N. Radde, “Towards experimental design using a Bayesian framework for parameter identification in dynamic intracellular network models,” Procedia Computer Science, vol. 1, no. 1, Art. no. 1, 2010, doi: 10.1016/j.procs.2010.04.184.
    13. A. Kramer and N. Radde, “A Statistical Framework for Noise Separation in Dynamic Models of Intracellular Networks,” AIP Conf. Proc., vol. 1303, pp. 68--73, 2010, doi: 10.1063/1.3527187.
    14. M. Kranz, P. Holleis, and A. Schmidt, “Embedded interaction: Interacting with the internet of things,” IEEE Internet Computing, vol. 14, no. 2, Art. no. 2, 2010, doi: 10.1109/MIC.2009.141.
    15. R. Krause, B. Markert, and W. Ehlers, “A Porous Media Model for the Description of Adaptive Bone Remodelling,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 79--80, 2010, doi: 10.1002/pamm.201010032.
    16. C. Krekeler et al., “Electrostatic properties of liquid 1,3-dimethylimidazolium chloride: role of local polarization and effect of the bulk,” Physical Chemistry Chemical Physics, vol. 12, no. 8, Art. no. 8, 2010, doi: 10.1039/b917803c.
    17. T. Kurz, P. Eberhard, C. Henninger, and W. Schiehlen, “From Neweul to Neweul-M2: Symbolical Equations of Motion for Multibody System Analysis and Synthesis,” Multibody System Dynamics, vol. 24, no. 1, Art. no. 1, 2010, doi: 10.1007/s11044-010-9187-x.
    18. J. Kästner and P. Sherwood, “The ribosome catalyzes peptide bond formation by providing high ionic strength,” Molecular Physics, vol. 108 (3–4), pp. 293--306, 2010, doi: 10.1080/00268970903446764.
    19. H. Köroglu and C. W. Scherer, “Robust generalized asymptotic regulation against non-stationary sinusodial disturbances with uncertain frequencies,” Int. J. Robust Nonlin., vol. 21, pp. 883–903, 2010, [Online]. Available: https://doi.org/10.1002/rnc.1634
    20. H. Köröglu and C. W. Scherer, “Robust generalized asymptotic regulation against non-stationary sinusoidal disturbances with uncertain frequencies,” SO International Journal of Robust and Nonlinear Control, vol. 21, no. 21, Art. no. 21, 2010, doi: 10.1002/rnc.1634.
    21. I. E. Köse and C. W. Scherer, “Gain Scheduled Control Synthesis using Dynamic D-Scales,” 49th IEEE Conf. Decision and Control, vol. 0, 2010, doi: 10.1109/CDC.2010.5717880.

  12. L

    1. B. Leonhardi, B. Mitschang, R. Pulido, C. Sieb, and M. Wurst, “Augmenting OLAP exploration with dynamic advanced analytics,” Proceedings of the 13th International Conference on Extending Database Technology, vol. 0, pp. 687--692, 2010, doi: 10.1145/1739041.1739127.
    2. W. Li and S. Simon, “Numerical Error Analysis for Statistical Software on Multi-Core Systems,” Proceedings of COMPSTAT’2010, vol. 0, pp. 1287--1294, 2010, [Online]. Available: http://www-roc.inria.fr/axis/COMPSTAT2010/images/contents_ebook.pdf

  13. M

    1. J. Mabuma, B. Markert, and W. Ehlers, “Continuum-Mechanical Modelling of Hip Cartilage under Physio-Dynamical Loading,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 693--694, 2010, doi: 10.1002/pamm.201010331.
    2. A. Marcos, J. Veenman, and C. W. Scherer, Application of LPV Modeling, Design and Analysis Methods to a Re-entry Vehicle, vol. 0. Proc. AIAA Guidance, Navigation and Control Conf, 2010. doi: 10.2514/6.2010-8192.
    3. A. Marcos et al., “Application of LPV Modeling, Design and Analysis Methods to Re-entry Vehicle,” in Proc. AIAA Guidance, Navigation and Control Conf., in Proc. AIAA Guidance, Navigation and Control Conf. Toronto, Canada, Aug. 2010. [Online]. Available: https://doi.org/10.2514/6.2010-8192
    4. B. Markert, Y. Heider, and W. Ehlers, “Comparison of monolithic and splitting solution schemes for dynamic porous media problems,” International Journal for Numerical Methods in Engineering, vol. 82, no. 11, Art. no. 11, 2010, doi: 10.1002/nme.2789.
    5. C. Miehe, J. Dettmar, and D. Zäh, “Homogenization and Two-Scale Simulations of Granular Materials for Different Microstructural Constraints,” International Journal of Numerical Methods in Engineering, vol. 83, pp. 1206--1236, 2010, doi: 10.1002/nme.2875.
    6. C. Miehe, M. Hofacker, and F. Welschinger, “A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits,” Computer Methods in Applied Mechanics and Engineering, vol. 199, pp. 2765--2778, 2010, doi: 10.1016/j.cma.2010.04.011.
    7. C. Miehe, D. Rosato, and I. Frankenreiter, “Fast estimates of evolving orientation microstructures in textured bcc polycrystals at finite plastic strains,” Acta Materialia, vol. 58, pp. 4911--4922, 2010, doi: 10.1016/j.actamat.2010.05.004.
    8. C. Miehe, F. Welschinger, and M. Hofacker, “Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations,” International Journal of Numerical Methods in Engineering, vol. 83, no. 10, Art. no. 10, 2010, doi: 10.1002/nme.2861.
    9. C. Miehe, F. Welschinger, and M. Hofacker, “A Phase Field Model of Electromechanical Fracture,” Journal of the Mechanics and Physics of Solids, vol. 58, no. 10, Art. no. 10, 2010, doi: 10.1016/j.jmps.2010.06.013.
    10. H. Minamoto, R. Seifried, P. Eberhard, and S. Kawamuraa, “Analysis of repeated impacts on a steel rod with visco-plastic material behavior,” European Journal of Mechanics - A/Solids, vol. 30, no. 3, Art. no. 3, 2010, doi: 10.1016/j.euromechsol.2010.12.002.
    11. D. Molnar, P. Binkele, S. Hocker, and S. Schmauder, “Multiscale Modelling of Nano Tensile Tests for Different Cu-Precipitation States in u000balpha-Fe,” Proceedings of the Fifth International Conference on Multiscale Materials Modeling, vol. 0, pp. 235--239, 2010, [Online]. Available: http://www.verlag.fraunhofer.de/bookshop/buch/Proceedings-of-the-Fifth-International-Conference-Multiscale-Materials-Modeling-MMM2010/234391
    12. M. Mottahedi, A. Dadalau, A. Hafla, and A. Verl, “Numerical analysis of relaxation test based on Prony series material model,” Integrated Systems, Design and Technology, vol. 0, 2010, doi: 10.1007/978-3-642-17384-4_8.
    13. J. Möhrmann, G. Heidemann, C. Hubig, U.-P. Käppeler, and P. Levi, “Context Generation with Image Based Sensors. An Interdisciplinary Enquiry on Technical and Social Issues and their Implications for Systen Design,” WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY, vol. 61, pp. 311--317, 2010, doi: 10.1.1.192.8466.
    14. U. Münz, A. Papachristodoulou, and F. Allgöwer, “Delay robustness in consensus problems,” Automatica, vol. 46, no. 8, Art. no. 8, 2010, doi: 10.1016/j.automatica.2010.04.008.

  14. N

    1. P. Naghipour, M. Bartsch, L. Chernova, J. Hausmann, and H. Voggenreiter, “Effect of fiber angle orientation and stacking sequence on mixed mode fracture toughness of carbon fiber reinforced plastics: Numerical and experimental investigations,” Materials Science and Engineering: A, vol. 527, no. 3, Art. no. 3, 2010, doi: 10.1016/j.msea.2009.07.069.
    2. A. Neelov and C. Holm, “Interlaced P3M algorithm with analytical and ik-differentiation,” Journal of Chemical Physics, vol. 132, no. 23, Art. no. 23, 2010, doi: 10.1063/1.3430521.
    3. F. Niedermann, S. Radeschütz, and B. Mitschang, “Design-Time Process Optimization through Optimization Patterns and Process Model Matching,” Proceedings of the 12th Conference on Commerce and Enterprise Computing (CEC), 2010, doi: 10.1109/CEC.2010.9.
    4. W. Nowak, “Measures of Parameter Uncertainty in Geostatistical Estimation and Geostatistical Optimal Design,” Mathematical Geosciences, vol. 42, no. 2, Art. no. 2, 2010, doi: 10.1007/s11004-009-9245-1.
    5. W. Nowak, F. P. J. de Barros, and Y. Rubin, “Bayesian Geostatistical Design: Task-Driven Optimal Site Investigation When the Geostatistical Model is Uncertain,” Water Resources Research, vol. 46, p. W03535, 2010, doi: 10.1029/2009WR008312.
    6. P. Nuske, B. Faigle, R. Helmig, J. Niessner, and I. Neuweiler, “Modeling gas-water processes in fractures with fracture flow properties obtained through upscaling,” Water Resources Research, vol. 46, 2010, doi: 10.1029/2009WR008076.

  15. O

    1. S. Oladyshkin, H. Class, R. Helmig, and W. Nowak, “Highly efficient tool for probabilistic risk assessment of CCS joint with injection design,” Proceedings of XVIII International Conference on Water Resources, vol. 0, 2010, [Online]. Available: http://congress.cimne.com/CMWR2010/Proceedings/docs/p15.pdf

  16. Q

    1. B. Qiao, J. J. Cerda, and C. Holm, “Poly(styrenesulfonate)-Poly(diallyldimethylammonium) Mixtures: Toward the Understanding of Polyelectrolyte Complexes and Multilayers via Atomistic Simulations,” Macromolecules, vol. 43, no. 18, Art. no. 18, 2010, doi: 10.1021/ma101091k.

  17. R

    1. N. Radde, “Fixed point characterization of biological networks with complex graph topology,” Bioinformatics, vol. 26, no. 22, Art. no. 22, 2010, doi: 10.1093/bioinformatics/btq517.
    2. M. Reble and F. Allgöwer, “Stabilizing design parameters for model predictive control of constrained nonlinear time-delay systems,” 9th IFAC Workshop on Time Delay Systems, vol. 0, pp. 361--366, 2010, doi: 10.3182/20100607-3-CZ-4010.00064.
    3. M. Reble and F. Allgöwer, “General Design Parameters of Model Predictive Control for Nonlinear Time-Delay Systems,” Proc.  49th IEEE Conference on Decision and Control, vol. 0, pp. 176--181, 2010, doi: 10.1109/CDC.2010.5718067.
    4. O. Renn, “The contribution of different types of knowledge towards understanding, sharing and communicating risk concepts,” Catalan Journal of Communication & Cultural Studies, vol. 2, no. 2, Art. no. 2, 2010, doi: 10.1386/cjcs.2.2.177_1.
    5. T. Ricken and J. Bluhm, “Remodeling and growth of living tissue: a multiphase theory,” Archive of Applied Mechanics, vol. 80, no. 5, Art. no. 5, 2010.
    6. T. Ricken, U. Dahmen, and O. Dirsch, “A biphasic model for sinusoidal liver perfusion remodeling after outflow obstruction,” Biomechanics and Modeling in Mechanobiology, vol. 9, no. 4, Art. no. 4, Aug. 2010, doi: 10.1007/s10237-009-0186-x.
    7. C. Rohde, “A Local and Low-Order Navier-Stokes-Korteweg System,” Contemporary Mathematics, vol. 526, pp. 315--337, 2010, doi: 10.1090/conm/526.

  18. S

    1. M. Sayar and C. Holm, “Equilibrium polyelectrolyte bundles with different multivalent counterion concentrations,” Physical Review E, vol. 82, no. 3, Art. no. 3, 2010, doi: 10.1103/PhysRevE.82.031901.
    2. D. Scheer, C. Benighaus, L. Benighaus, S. Gold, J. Ortleb, and O. Renn, “Communication of risk hazard from the angle of different stakeholders,” BfR-Wissenschaft, vol. 10, pp. 1--149, 2010, [Online]. Available: http://www.bfr.bund.de/cm/350/communication_of_risk_and_hazard_from_the_angle_of_different_stakeholders.pdf
    3. C. W. Scherer and I. E. Köse, “Gain-Scheduled Control Synthesis using Dynamic $D$-Scales,” in 49th IEEE Conf. Decision and Control, in 49th IEEE Conf. Decision and Control. Altanta, GA, 2010, pp. 6845–6850. [Online]. Available: https://doi.org/10.1109/CDC.2010.5717880
    4. C. W. Scherer and S. Weiland, “Linear Matrix Inequalities in Control,” in The Control Systems Handbook, Second Edition, W. S. Levine, Ed., in The Control Systems Handbook, Second Edition. , CRC Press, 2010, pp. 1–30. [Online]. Available: https://www.taylorfrancis.com/books/e/9781420073652/chapters/10.1201%2Fb10384-61
    5. D. Schittler, J. Hasenauer, F. Allgöwer, and S. Waldherr, “Cell differentiation modeled via a coupled two-switch regulatory network,” Chaos, vol. 20, no. 4, Art. no. 4, 2010, doi: 10.1063/1.3505000.
    6. G. Schley, M. Radetzki, and A. Kohler, “Degradability Enabled Routing for Network-on-Chip Switches,” it - Information Technology, vol. 52, no. 4, Art. no. 4, 2010, doi: 10.1524/itit.2010.0592.
    7. A. Schmidt, “Ubiquitous Computing: Are we there yet?,” Computer, vol. 43, no. 2, Art. no. 2, 2010, doi: 10.1109/MC.2010.54.
    8. G. S. Schmidt, C. Ebenbauer, and F. Allgöwer, “Synchronization conditions for Lyapunov oscillators,” Decision and Control, pp. 6230--6235, 2010, doi: 10.1109/CDC.2010.5717083.
    9. G. S. Schmidt, J. Wu, U. Munz, and F. Allgower, “Consensus in bistable and multistable multi-agent systems,” Decision and Control, pp. 7135--7140, 2010, doi: 10.1109/CDC.2010.5717474.
    10. J. Schmidt et al., “Ionic Charge Reduction and Atomic Partial Charges from First-Principles Calculations of 1,3-Dimethylimidazolium Chloride,” Journal of Physical Chemistry B, vol. 114, no. 18, Art. no. 18, 2010, doi: 10.1021/jp910771q.
    11. G. Schneider, “Bounds for the nonlinear Schrödinger approximation of the Fermi-Pasta-Ulam system,” Applicable Analysis, vol. 89, no. 9, Art. no. 9, 2010, doi: 10.1080/00036810903277150.
    12. M. Schulz, D. Scheer, and S. Wassermann, “Neue Technik, alte Pfade? - Zur Akzeptanz der CO2-Speicherung in Deutschland,” Gaia, vol. 19, no. 4, Art. no. 4, 2010, [Online]. Available: http://www.oekom.de/fileadmin/zeitschriften/gaia_leseproben/GAIA_4_2010_Schulz.pdf
    13. U. Schwiegelshohn et al., “Perspectives on grid computing,” Future Generation Computer Systems, vol. 26, no. 8, Art. no. 8, 2010, doi: 10.1016/j.future.2010.05.010.
    14. R. Seifried, Two Approaches for Designing Minimum Phase Underactuated Multibody Systems, vol. 0. 2010. [Online]. Available: http://www.itm.uni-stuttgart.de/staff/Seifried/Includes/PAPERS/IMSD2010_seifried.pdf
    15. R. Seifried, A. Held, and F. Dietmann, “Analysis of Feed-Forward Control Designs for Flexible Multibody Systems,” Proceedings of the 5th Asian Conference on Multibody Dynamics, Kyoto, vol. 5, no. 3, Art. no. 3, 2010, doi: 10.1299/jsdd.5.429.
    16. R. Seifried, H. Minamoto, and P. Eberhard, “Viscoplastic Effects Occurring in Impacts of Aluminum and Steel Bodies and Their Influence on the Coefficient of Restitution,” Journal of Applied Mechanics, vol. 77 /4), 2010, doi: 10.1115/1.4000912.
    17. R. Seifried, W. Schiehlen, and P. Eberhard, The role of the coefficient of restitution on impact problems in multi-body dynamics, vol. 224, no. 3. 2010. doi: 10.1243/14644193JMBD239.
    18. M. Sonntag, K. Görlach, D. Karastoyanova, and N. Currle-Linde, Towards Simulation Workflows With BPEL: Deriving Missing Features From GriCoL, vol. 0. Acta Press, 2010. [Online]. Available: http://www.actapress.com/Content_of_Proceeding.aspx?proceedingID=643
    19. M. Sonntag, K. Görlach, D. Karastoyanova, F. Leymann, and M. Reiter, “Process Space-Based Scientific Workflow Enactment,” Business Process Integration and Management, vol. 5, no. 1, Art. no. 1, 2010, doi: 10.1504/IJBPIM.2010.033173.
    20. M. Sonntag and D. Karastoyanova, Next Generation Interactive Scientific Experimenting Based on the Workflow Technology, vol. 0. Acta Press, 2010. [Online]. Available: http://www.actapress.com/Content_of_Proceeding.aspx?proceedingID=643
    21. M. Sonntag, D. Karastoyanova, and E. Deelman, “BPEL4Pegasus: Combining Business and Scientific Workflows,” Service-Oriented Computing, vol. 6470, pp. 728--729, 2010, doi: 10.1007/978-3-642-17358-5_75.
    22. M. Sonntag, D. Karastoyanova, and E. Deelman, Bridging The Gap Between Business And Scientific Workflows, vol. 0. IEEE Computer Society, 2010. doi: 10.1109/eScience.2010.12.
    23. M. Sonntag, D. Karastoyanova, and F. Leymann, The Missing Features of Workflow Systems for Scientific Computations, vol. 0. Gesellschaft für Informatik, 2010. [Online]. Available: http://www.gi-ev.de/service/publikationen/lni/gi-edition-proceedings-2010/gi-edition-lecture-notes-in-informatics-lni-p-160.html

  19. T

    1. Q. Tang and P. Eberhard, “Modeling and Motion Planning for a Population of Mobile Robots,” Proceedings of the 18th CISM-IFToMM Symposium on Robotics ROMANSY, vol. 524, pp. 409--416, 2010, doi: 10.1007/978-3-7091-0277-0_48.
    2. M. A. Tariq, G. G. Koch, B. Koldehofe, I. Khan, and K. Rothermel, “Dynamic publish/subscribe to meet subscriber-defined delay and bandwidth constraints,” Lecture Notes in Computer Science, vol. 6271, pp. 458--470, 2010, doi: 10.1007/978-3-642-15277-1_44.
    3. C. Tobias, J. Fehr, and P. Eberhard, “Durability-based Structural Optimization with Reduced Elastic Multibody Systems,” Proceedings of the 2nd International Conference on Engineering Optimization, 2010, [Online]. Available: /brokenurl#www1.dem.ist.utl.pt/engopt2010/Book_and_CD/Papers_CD_Final_Version/pdf/01/01119-01.pdf
    4. M. Troldborg, W. Nowak, N. Tuxen, P. L. Bjerg, and R. Helmig, “Uncertainty evaluation of mass discharge estimates from a contaminated site using a fully Bayesian framework,” Water Resources Reseach, vol. 46, 2010, doi: 10.1029/2010WR009227.
    5. E. J. Trottemant, C. W. Scherer, M. Weiss, and A. Vermeulen, “Robust Missile Feedback Control Strategies,” J. Guid. Control Dynam., vol. 33, no. 6, Art. no. 6, Nov. 2010, [Online]. Available: https://doi.org/10.2514/1.48844
    6. S. Tyagi, M. Suezen, M. Sega, M. Barbosa, S. S. Kantorovich, and C. Holm, “An iterative, fast, linear-scaling method for computing induced charges on arbitrary dielectric boundaries,” Journal of Chemical Physics, vol. 132, no. 15, Art. no. 15, 2010, doi: 10.1063/1.3376011.

  20. V

    1. J. Veenman and C. W. Scherer, “On Robust LPV Controller Synthesis: A Dynamic Integral Quadratic Constraint based Approach,” in 49th IEEE Conf. Decision and Control, in 49th IEEE Conf. Decision and Control. Atlanta, USA, 2010, pp. 591–596. [Online]. Available: https://doi.org/10.1109/CDC.2010.5717992

  21. W

    1. A. Wagner and W. Ehlers, “Continuum-Mechanical Analysis of Human Brain Tissue,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 99--100, 2010, doi: 10.1002/pamm.201010042.
    2. S. Waldherr, F. Allgöwer, and N. Radde, “Generic bifurcations in the dynamics of biochemical networks,” Proceedings of IEEE Multi-Conference on Systems and Control, vol. 0, pp. 135--141, 2010, doi: 10.1109/CCA.2010.5611139.
    3. S. Waldherr, J. Wu, and F. Allgöwer, “Bridging time scales in cellular decision makingwith a stochastic bistable switch,” BMC Systems Biology, vol. 4, no. 108, Art. no. 108, 2010, doi: 10.1186/1752-0509-4-108.
    4. H. Wang, F. Dommert, and C. Holm, “Optimizing working parameters of the smooth particle mesh Ewald algorithm in terms of accuracy and efficiency,” Journal of Chemical Physics, vol. 133, no. 3, Art. no. 3, 2010, doi: 10.1063/1.3446812.
    5. H. Weking, J. Schlottke, M. Boger, P. Rauschenberger, B. Weigand, and C.-D. Munz, “DNS of Rising Bubbles using VOF and balanced force surface tension,” High Performance Computing on Vector Systems, vol. 0, 2010, doi: 10.1007/978-3-642-11851-7_13.
    6. P. Wieland, J.-S. Kim, and F. Allgöwer, “On topology and dynamics of consensus among linear high-order agents,” International Journal of Systems Science, vol. 42, pp. 1831--1842, 2010, doi: 10.1080/00207721003658202.
    7. J. Witte, H. M. N. K. Balini, and C. W. Scherer, Robust and LPV control of an AMB System, vol. 0. Proc. American Control Conf, 2010. doi: 10.1109/ACC.2010.5531273.
    8. J. Witte, H. M. N. K. Balini, and C. W. Scherer, “Experimental results with stable and unstable LPV controllers for an Active Magnetic Bearing System,” in IEEE Multi-Conference on Control, in IEEE Multi-Conference on Control. Japan, 2010, pp. 950–955. [Online]. Available: https://doi.org/10.1109/CCA.2010.5611087
    9. J. Witte, H. M. N. K. Balini, and C. W. Scherer, Experimental results with stable and unstable LPV controllers for active magnetic bearing systems. IEEE Multi-Conference on Control, Japan, 2010, 2010. doi: 10.1109/CCA.2010.5611087.

  22. Y

    1. S. Yu, C. Böhm, H. Chen, and F. Allgöwer, “MPC with one free control action for constrained LPV systems,” IEEE International Conference on Control Applications, pp. 1343--1348, 2010, doi: 10.1109/CCA.2010.5611145.
    2. Y. Yudin, T. Krasikova, Y. Dorozhko, N. Currle-Linde, and M. Resch, “An efficient workflow system in real HPC organizations,” International Workshop on Science Gateways, vol. 0, pp. 23--27, 2010, [Online]. Available: http://documents.ct.infn.it/record/485/files/iwsg10-proceedings.1.pdf

  23. Z

    1. S. Zinatbakhsh, B. Markert, and W. Ehlers, “On the General Solution of Coupled Problems: Comparison of Monolithic and Partitioning Approaches,” Proceedings in Applied Mathematics and Mechanics, vol. 10, pp. 395--396, 2010, doi: 10.1002/pamm.201010190.

  24. Ü

    1. M. Üffinger, S. Frey, and T. Ertl, “Interactive High-Quality Visualization of Higher-Order Finite Elements,” Computer Graphics Forum (CGF), vol. 29, no. 2, Art. no. 2, 2010, doi: 10.1111/j.1467-8659.2009.01603.x.
To the top of the page