New publication by Nikolaos Karadimitriuo, Holger Steeb and Vahid Joeker-Niasar

November 27, 2019 /

[Picture: © panthermedia.net / Karsten Ehlers]

Dr. Nikolaos Karadimitriuo (Institute of Applied Mechanics), Prof. Dr. Holger Steeb (Member of the SimTech board of directors and professor at the Institute of Applied Mechanics) and the group of Dr. Vahid Joeker-Niasar from the University of Manchester have published a joint publication on two-phase flow dynamics based on micro-fluidic experiments in the context of SimTech and the SFB 1313.
 
The abstract you can find here
 

"The interaction between fluid-fluid and solid-fluid interfacial forces and surface roughness control the wettability. The ionic strength is the most important factor that controls electro-static forces. Thus, a modification of the ionic strength can potentially lead to a change of the wettability, as shown in recent experimental works related to low-salinity water flooding (LSWF), which is an enhanced oil recovery technology. Despite the significant research published on this topic, for the first time, we present how a change of the ionic strength alters the wettability in a pore network micromodel made of silanised PDMS. We visualised the invasion of brine in an elongated hydrophobic PDMS micromodel, initially saturated with Fluorinert. Under different injection rates and ionic strengths and using image processing, we quantified the contact angle distribution in the flow network, the recovery curve with time, the brine breakthrough time, and the temporal change of resident saturation. The results imply that there is an optimal range of salinity at which saturation change accelerates and the breakthrough saturation maximises, which highlights the concept of optimal salinity in wettability alteration. Also, we observed a shift of the contact angle distribution towards a more water-wet state. Given the non-monotonic trend of the breakthrough saturation with brine salinity, as well as recovery time versus the ionic strength, we conclude that the induced surface roughness is not the primary drive behind the accelerated saturation change. Therefore, the recovery time difference can be primarily attributed to the local alterations of the wetting properties of the porous medium due to the change of the ionic strength."

The article was published in the Water Resources Management Journal.

To the top of the page